Most often we are ordered:

• Welding works on industrial and communication pipelines, installation of metal structures.
• Welder services during major repairs and rescue operations.
• Welding of sewage systems, water pipes, heating.
• Repair, installation of metal structures of security systems, such as gratings, fences.
• Emergency departure of the company's gas welders or electric welders to the site is possible.

You can order the following types of welding from us

Welding of metal structures

We manufacture non-standard shelving, gates, wickets, and other structures from metal or non-ferrous alloys. Prefabricated structures are obtained original and individual in style.

Welding stainless steel semi-automatic

This is one of the most difficult processes in production. Welding of stainless steel is carried out in a protective gas environment using wire. This requires experience, skills, knowledge of the process.

Welding stainless steel semi-automatic (MIG)

This method allows to make the contact angle more acute, taking into account the structure of the metal, its chemical properties and structure. In this case, a short arc, jet transfer or pulse welding can be used. The method is used when welding stainless steel structures when welding fences, metal tanks, in car repairs.

Welding stainless steel argon

The technology involves welding stainless steel parts in argon. The technology is indispensable when connecting thin-walled blanks. Be sure to control the flow of argon, argon pressure during welding of stainless steel.
We consider that the shrinkage of the seam, the welding joint must be done with a small gap. In addition, the material is carefully prepared for processing, cleaned with a steel brush, degreased with a solvent, if necessary, other preparatory work is carried out. We always set up the devices correctly, since we understand that the quality of argon welding of stainless steel depends on how well the edges of the blanks fit.

Services of a welder on site

Using the method of cold, semi-hot cast iron welding, we work with aluminum and its alloys.
Aluminum is one of the most difficult metals to work with. It is brittle in a heated state, pores may form due to the presence of hydrogen in the seam, crystallization cracks may appear on its surface. The thermal conductivity of aluminum is 3 times higher than that of iron, the coefficient of thermal expansion is twice as large, which contributes to an increase in deformation.
Our staff has extensive experience, allowing high-quality welding of aluminum or its alloys. For this, argon welding with alternating current is used. The surface is carefully prepared, and only then work is carried out.
You can order services of the welder from us. To get a quotation, leave a request by e-mail.